Message Explanation Recommended Action
Memory Overflow This error occurs when FW
memory is not enough to save
the printing page.
Reduce the size of the data, and
then try the operation again.
Misfd: Dupl Unit There is a paper jam in the
duplex unit.
Remove the misfed paper.
See page 156 "Removing
Printing Jams".
Internal Misfeed There is a paper jam in the
fusing unit.
Misfeed: PprTray There is a paper jam in Tray 1
or Tray 2.
Misfeed: Tray 1 There is a paper jam in Tray 1.
Misfeed: Tray 2 There is a paper jam in Tray 2.
Misfd: Stnd Tray There is a paper jam in the
paper exit area.
Remove paper from Bypass
Tray
The machine failed to proceed
with the print job, because Tray
1 or Tray 2 was specified as the
input tray but paper was loaded
in the bypass tray.
Remove paper from the bypass
tray.
Replace Toner: # The printer is out of toner #
(Black, Magenta, Cyan or
Yellow).
Replace the print cartridge.
See page 127 "Replacing the
Print Cartridge".
Repl Tnr soon: # The printer is almost out of toner
# (Black, Magenta, Cyan or
Yellow).
Prepare a new print cartridge.
Replace Fusing Unit It is time to replace the Fusing
unit.
Contact your sales or service
representative.
Replace Intermdt Transfer Belt It is time to replace the transfer
belt.
Contact your sales or service
representative.
Replace Transfer Roller It is time to replace the transfer
roller.
Contact your sales or service
representative.
Replace soon: Waste Tnr Bottle The waste toner bottle needs to
be replaced soon.
Prepare a new waste toner
bottle.
Error and Status Messages on the Control Panel
153
To Next Page
Loading...
Need help?
General