2.Replacement and Adjustment
40
5. Remove the stapler retreat motor (M13) [A]( ×2, ×1).
Jogger Fence Motor (Front) (M4), Jogger Fence Motor (Rear) (M5)
1. Remove the base cover (Stapler Retreat Motor (M13)).
2. Remove the jogger fence motor (front) (M4) [A] ( ×2, ×1, Timing belt×1).
• During re-assembly, remove the jogger fence motor (rear) bracket, and check that the
motor pulley has not separated from the timing belt.
To Next Page
Loading...
