Ricoh SR5090 - Page 49

1.Detailed Descriptions
45
No.
Name
No.
Name
1
Booklet Exit Sensor
3
Fold Unit Exit Roller
2
Fold Roller
4
Fold Transport Motor
Booklet Staple Transport
As paper goes through the booklet staple path, the shift roller unit [A] moves up to its operating position
in order to be ready to transport paper. The shift roller lift motor moves the shift roller unit [A]. The shift
roller drive motor rotates the shift roller [B] to transport paper to the bottom.
After the paper is transported, the shift roller unit [B] moves up away from the paper face. While the
shift roller unit moves up, the shift roller [A] rotates to feed paper out to the bottom. Then the shift roller
unit drops to bump the stack junction gate [C] onto the edge of the paper stack. With this operation, the
paper stack is aligned.