‐106‐
UPS models MST 160 MST 200
MODE AND EFFICIENCY
Operating mode
True on line double conversion
Eco mode
Smart Active mode
Stand By Off (Emergency power supply)
Frequency Converter
AC/AC yield in Eco mode Up to 99%
OTHER
Noise level with typical load ≤ 68B(A) ≤ 70dB(A)
Casing degree of protection IP20
Ambient temperature
(9)
0 – 40 °C
Colour RAL 7016
(1)
Maximum input current in the following conditions: nominal load (PF=1), 345V input voltage and batteries charging with 25A
(2)
Nominal battery current in the following conditions: nominal load (PF=1), battery at nominal voltage
(3)
@ 100% load & THDv ≤ 1%
(4)
To keep the output voltage within the specified precision, you may need to recalibrate the unit after it has been in service for a long time
(5)
If the mains frequency is within ±5% of the selected value, the UPS is synchronised with the mains. If frequency is out of the
range of tolerance or in battery operation, the frequency is the one selected +0.01%
(6)
Mains/Battery @ load 0% -100%
(7)
@ Mains / battery / mains @ resistive load 0% / 100% / 0%
(8)
Recharging current is automatically regulated in relation to the installed battery capacity
(9)
20 – 25 °C for increased battery life
FURTHER INFORMATION IS AVAILABLE IN THE INCLUDED “INSTALLATION INSTRUCTIONS”
To Next Page
Loading...
