Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-8
The operation menu and description of User-defined IIC address are shown in the
following figure and table.
Figure 2-9 Table 2-3 Operation menu description
Menu
Setting
Description
Address
User
None
Enable or disable the Address of
the slave or host chip.
User
0~127
Set the Address of the slave or
host chip.
Operation
Write
Read
To set the operation mode.
DONE
Store all the changes and return
the previous level menu.