RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
To Set the Code Pattern
Code Pattern setting generates the output code patterns. It includes common
patterns such as “All0”, “All1”, “01”, PRBS (Pseudo Random Binary Sequence) and
user-defined codes.
Common Code Pattern
Press Arb Edit Digital W Code Pat. Choose common code pattern such as:
AII0、AII1、01、8PRBS、16PRBS、32PRBS. Use the knob to choose the required code
pattern and then press F3, as shown in the Figure 2-13.
Figure 2-13 Choose the common code patterns
Table 2-5 Description of the Common Code Pattern
To Next Page
Loading...