Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-13
User Define Code Pattern
Press Arb  Edit Digital W  Code Pat  User. Scroll until “User” appears in
the menu bar as shown in Figure 2-14. Users can set the data output offset as
needed.
Figure 2-14 Set the output offset
When “User” is selected, the outputs of the generator will be the user edited data
(See the next section “User data editor”). The “Offset” setting is convenient for
users to choose the starting position of output data.