RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
Data Browse, Store and Recall
1. Data browse
Press F5 and switch to the second page as shown in Figure 2-18. Press DataPage
UpCross to display data in the previous page, press DataPage DnCross you will see
data in the next page.
Figure 2-18 Switch the data page
Below the Data Space, it shows the total data length and the current page. If users
want to edit data on any page; switch to that page by pressing DataPage UpCross
or DataPage DnCross. Press F1 to return the upper level menu, and then edit data
as introduced before.
To Next Page
Loading...