Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-18
2. Save and Recall
Users can store data in the non-volatile memory or a U disk, and recall them into
the volatile space for editing.
Press Save Recall to enter the save and recall interface as shown in Figure 2-19.
Figure 2-19 Save and recall interface
The Save/Recall menu and operation description are shown in the following figures
and tables.
Figure 2-20(1) Table 2-6(1) Operation menu description
Menu
Setting
Description
File Type
Data
All File
State
Arbitrary Waveform files
All kinds of files
The Setting of the generator
Browser
Directory
Path
File
Shift between Directory, Path
and file
Save
Save digital waveform data to
the appointed place
Recall
Recall the waveform or Setting
information in the specific
position in the memory.