Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-14
User Data Editor
Edit Address and Data
1. Edit address
Select Address or Data to edit; press F1 to toggle the two options. Select Address
as shown in Figure 2-15.
Figure 2-15 Select “Address” to edit
When editing address, use the left or right direction key to select the address bit.
Use the knob to choose the numeric or letter on the displayed keyboard. Press
Select to confirm the selection.
PROMPT
 Address can only be set to an even number, or an error will appear.