RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2. Edit data
Press F1 and select Data, and then modify the data on current highlighted position.
There are two kinds of input types: Hexadecimal and Binary. Use the left or right
direction key to select the data bit for editing. Use the knob to choose the numeric
or letter on the displayed keyboard. Press SELECT to confirm the selection. The
input format of Hexadecimal and Binary are shown in Figure 2-16.
Figure 2-16(a) Edit data (Hexadecimal)
Figure 2-16(b) Edit data (Binary)
To Next Page
Loading...