Need help?Do you have a question about the Rigol DG3000 Series and is the answer not in the manual?
General| Brand | Rigol |
|---|---|
| Model | DG3000 Series |
| Category | Control Unit |
| Language | English |
Explains terms used in the manual for safety warnings.
Describes terms that may appear directly on the instrument.
Lists and explains safety symbols found on the instrument.
Details the physical connectors and ports on the logic signal output module.
Instructions on how to physically connect the logic signal output module to the DG3000.
Overview of the graphical displays for protocol and data editing interfaces.
Configures the format and parameters for communication protocols like RS232, SPI, IIC, PO.
Sets output code patterns, including common patterns and user-defined codes.
Provides tools to edit digital waveform data in hexadecimal or binary form.
Explains how to output user-defined data based on protocol and offset settings.
Defines the output data length in bytes for various protocols.
Configures the data transmission rate (Baud or bps) for different protocols.
Sets the trigger modes for waveform generation, including Auto and Burst.
Selects output lines and sets channel output voltage for each protocol.
Calibrates the output voltage of the module to ensure accuracy.
Step-by-step guide to generate a RS232 digital waveform with specific parameters.
Step-by-step guide to generate a SPI digital waveform with specific parameters.
Step-by-step guide to generate an IIC digital waveform with specific parameters.
Step-by-step guide to generate a PO digital waveform with specific parameters.
Demonstrates generating an IIC waveform using the PO protocol via data editing.
Lists common error messages and their causes when operating the module.
Explains limits for data length and transmission rate, and overflow conditions.
Provides steps to resolve common issues if the digital module does not work.
Details the technical specifications for the logic signal output module.
Lists the standard accessories included with the logic signal output module.
Outlines the warranty terms and conditions for RIGOL products.
Provides guidelines for general care, cleaning, and maintenance of the instrument.
Information on how to contact RIGOL for support, service, or inquiries.
To Next Page