RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
Safety Notices
Review the following safety precautions carefully before operating the instrument
to avoid any personal injury or damage to the instrument or products connected to
it.
To avoid potential hazards, use the instrument in a manner only as specified by this
user manual.
The instrument should be serviced by qualified personnel only.
To avoid fire or personal injury
*Use proper power cord.
Only the dedicated power cord of the products approved by the State should be
used.
Connect and disconnect accessories properly.
Do not connect or disconnect probes or test leads while they are connected to a
voltage source.
*Ground the instrument.
This generator is grounded through the protective earthing conductor of the power
cord. To avoid electric shock, the grounding conductor must be connected to earth
ground. Maker sure the instrument is properly grounded before connecting the
input or output terminals.
Observe all terminal ratings.
To avoid fire or shock, observe all ratings and marks on the instrument. Follow the
user manual for further rating information before making connections to the
instrument.
Do not operate without covers.
Do not operate your generator with covers or panels removed.
*Use proper fuse.
To Next Page
Loading...
Need help?
General