Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-34
3) Manual trigger
Press Burst  Source  Manual, to enter the interface as shown in Figure 2-36.
The function key Trigger on the front panel will turn bright when Manual is
selected.
Figure 2-36 Choose manual trigger
Press F5, to enter the second page of “BURST” as shown in Figure 2-37. Select a
rising or a falling edge through the Trig Out option, or you can choose “Off” to
disable the trigger output.
Figure 2-37 Set the “trig out” signal
When finishing the trigger mode setting, press Burst to return the “DIGIT”
interface.