Rigol MSO5074 User Manual

Chapter 18 Store and Load RIGOL
MSO5000 User Guide 18-1
Chapter 18 Store and Load
You can save the current settings, waveforms, screen image, and parameters of the
oscilloscope in internal memory or external storage device (such as USB storage
device) in various formats and load the stored settings or waveforms when needed.
You can also copy a new file of the specified type as well as delete and rename the
specified type of file in the internal memory or external USB storage device via the
disk management menu.
Note: MSO5000 only supports the flash memory USB storage device of FAT32
format.
Contents in this chapter:
◼ Storage System
◼ Storage Type
◼ Load Type
◼ Internal Storage and Load
◼ External Storage and Load
◼ Disk Management
◼ Factory Settings

Rigol MSO5074 Specifications

General

Bandwidth	70 MHz
Channels	4
Timebase Accuracy	± 2 ppm
Operating Temperature	0 °C to +40 °C
Display	800x480
Waveform Capture Rate	500, 000 wfms/s
Vertical Resolution	8 bits
Interfaces	USB Host, USB Device, LAN, HDMI
Input Impedance	1 MΩ
Trigger Types	Edge, Slope, Pulse, Video, Pattern, Duration, Timeout, Window, Runt
Sample Rate	8 GSa/s