Rigol MSO5074 User Manual

RIGOL Chapter 20 System Utility Function Setting
20-6 MSO5000 User Guide
Press HDMI to enter the HDMI setting menu.
⚫ Press Output continuously to enable or disable the video output.
➢ ON: You can connect the instrument to an external display via this interface
to better observe the waveform display clearly from the external display.
➢ OFF: disables the interface.
⚫ Press Resolution to set the screen resolution. The available resolution includes
640x480, 720x480, and 1280x720.
USB Connection
The oscilloscope can communicate with a PC via the USB DEVICE interface on the
rear panel. No parameters are required to be configured.

Rigol MSO5074 Specifications

General

Bandwidth	70 MHz
Channels	4
Timebase Accuracy	± 2 ppm
Operating Temperature	0 °C to +40 °C
Display	800x480
Waveform Capture Rate	500, 000 wfms/s
Vertical Resolution	8 bits
Interfaces	USB Host, USB Device, LAN, HDMI
Input Impedance	1 MΩ
Trigger Types	Edge, Slope, Pulse, Video, Pattern, Duration, Timeout, Window, Runt
Sample Rate	8 GSa/s