RIGOL Chapter 2 Functions of the Front Panel of GPSA
2-42 RSA3000E User Guide
7) Deletes All Limits
Deletes all limit lines. After you press the menu, the data of all the limit lines
will be cleared and they will be restored to factory defaults.
5. Auto Couple
When you enable "Auto Couple" function, all the manual/auto settings in the
current measurement mode will be set to "Auto". This operation does not affect
other measurement modes.
In auto state, the auto coupled parameters are changed with their coupled
parameters. The auto coupling operation will ensure the optimal performance of
the instrument. After the operation, all the auto coupled parameters will
immediately be automatically reset based on the coupled parameters.
6. Meas Preset
Restores all parameters of the current measurement mode to their factory
default values.
To Next Page
Loading...
