49
ShowPageNames – When turned on, the name of the current page is displayed at the top on the main display. If this
parameter is turned off, or the current page does not have a name, the current preset and song are displayed normally.
ReverseMenus – When turned on, the Page, Preset, Setlist and Song Menus are displayed with the first items in the
bottom row of the Mastermind GT. When turned off, the menus are displayed with the first items in the top row.
SongNmOnly (Song Name only) - When turned on, makes the song name take up the entire main display. When this
setting is turned off, both the song name and current preset are shown in the main display.
System Functions Menu to reset the preset names using the current preset offset.
Hold mSec - Sets the number of milliseconds needed to activate a button’s secondary hold function. The default value
is 1200 msec (1.2 seconds)
1
st
Rpt mSec – Sets the number of milliseconds needed before a button repeats the first time. This is used on buttons
like Bank Up and Bank Down that repeat if you hold them down. The default value is 1500 msec (1.5 seconds).
Repeat mSec – Sets the number of milliseconds needed before a button repeats the second and subsequent times. The
default value is 300 msec (0.3 seconds).
Auto Page – When this setting is turned on (the default), selecting a new preset will cause the button page to change.
When turned off, the current button page will not change unless you press a Page button or execute a Page action.
Instant Bank – Instant Bank mode, when turned on, will automatically switch presets when you press the Bank Up or
Bank Down buttons. Instead of flashing the preset buttons, asking you to select a preset in the new bank, the GT will
switch banks and load the preset that appears on the currently selected preset button. For example, if you are on preset
3, and there are 6 presets per bank, pressing bank up will automatically switch to preset 9.
Page Preview – Page Preview changes how bank selection works. When turned off, the visible button page does not
change until you select a new preset. When Page Preview is turned on, the visible button page changes as you move up
and down through the banks. The button page associated with the first preset in a bank is the one that will be
displayed for that bank.
StartLastPrst (start up on last preset) – Normally, when the Mastermind GT powers up, it will always start on preset 1
(or preset 0, depending on the “1
st
Preset is 0” setting). When StartLastPreset is turned on, the GT will start up on the last
preset selected before it was powered down.
Display Settings Menu
The Display Settings menu allows you to adjust the brightness and contrast of the main display and the button displays.
Repeatedly press the corresponding brightness and contrast – /+ buttons to decrease or increase the contrast of the
displays.
In addition, there are a few other options that affect the displays:
Bold – when turned on, everything will be displayed in bold fonts. This makes the fonts more readable, but slightly
reduces the amount of information that can be displayed on each screen.
ShowPageNames – When turned on, the name of the current page is displayed at the top on the main display. If this
parameter is turned off, or the current page does not have a name, the current preset and song are displayed normally.
ReverseMenus – When turned on, the Page, Preset, Setlist and Song Menus are displayed with the first items in the
bottom row of the Mastermind GT. When turned off, the menus are displayed with the first items in the top row.
To Next Page
Loading...
Need help?
General
