56
IA Mode
The IA Mode function allows you to turn IA mode or or off. This performs the same function as the IA Mode
button, but because this is a button action and not a button type, it can be combined with other actions on the
same button.
Macro
The Macro function allows you to run one of the 128 macros defined in the system. Please see the Macros
section of the Other Special Features chapter for more information.
Page
The Page function makes the Mastermind GT switch to a particular button page when this button is pressed.
Page # - Selects the page number that should become visible when this button is pressed.
Preset
The Preset function recalls a particular preset when this button is pressed.
Preset – which preset to recall when this button is turned on
Step
This defines the end of a step for a cycle button. Please refer to the Cycle Buttons section for more details.
Tuner
The Tuner function turns on the tuner display when this button is selected.
Assign CC – This button allows you to choose a continuous controller from the list of functions defined for each device.
When this button is selected, you are prompted for a device, then prompted for one of the functions available on the
device (if any). The continuous controller number associated with that function is copied to this action.
Edit Pages
The Edit Pages menu lets you set parameters that are specific to each button page.
Name – Allows you to name each button page. This name will be displayed briefly when switching pages and in the
Page Menu. If ShowPageNames is turned on in the Display Settings menu, the page name will also be displayed at the
top of the main screen if the page name is not blank.
Edit Presets
The Edit Presets menu lets you define which program change messages are sent to each device for the preset, as well as
the preset name, expression pedal settings and the current button page.
Name – Sets the name of this preset.
Page – Sets the number of the button page that will be displayed when this preset is selected. Setting the page to
“Same” will keep the current button page when the preset is selected.
Tempo – Sets the tempo (in BPM) for this preset. A tempo setting of 0 (zero) indicates that this preset has no tempo
defined. See the Tap Tempo and MIDI Clock section for details.
To Next Page
Loading...
Need help?
General
