57
Exp Pedals – Brings you to the Expression Pedals menu to allow you to override the global expression pedal settings
for this preset.
External Switches – Brings you to the External Switches menu to allow you to override the global external switch
settings for this preset.
Local Buttons – Turning this on enables this preset to have a local button page. This button page will automatically be
displayed when the preset is selected, and will take the place of button page 16.
Edit Buttons – When Local Buttons is turned on, this option will become visible, allowing you to edit the local button
page for this preset.
Page Name – When Local Buttons is turned on, this option will become visible, allowing you to edit the local button
page’s name.
Preset Actions (x) – This button allows you to edit the actions that are assigned to this preset. Pressing this button
brings up a list of actions assigned to this preset, and an Add Action button. Pressing any of those buttons will bring
you to the Edit Action screen, described above.
Copy Preset – Allows you to copy the current preset to a new location.
The remaining buttons show any devices that are defined, and the bank and preset number that will be sent to those
devices when the preset is selected. Pressing one of these buttons allows you to change the bank and PC number for
the associated device.
Expression Pedals
The Expression Pedal menu allows you to edit the behavior of any of the four expression pedals. This menu can be
accessed from the Main Menu, which is where you set the global expression pedal settings. You can also enter this
menu from Edit Presets, which allows you to override the global settings for a preset.
Override – This parameter is only visible when editing the expression pedal settings for a particular preset (not from
the Main Menu). When editing a preset, turn this parameter On to override the global settings for this expression pedal.
The remainder of the settings below will be displayed so you can edit the expression pedal settings for the current
preset.
Name - Allows you to name this expression pedal.
SndOnPrst – Turning this on makes the expression pedal send its current CC value(s) every time you change to a new
preset. This parameter is only available in the global expression pedal menu.
Switch Grp – Assigns the pedal’s switch function to a button group. Setting this to a setting other than “None” will
allow the pedal to interact with other buttons in a group, switching off other buttons in the group when the pedal
switch is activated. See “Set Switch Position” below for more information on the pedal switch feature. Also see the Edit
Buttons section for more information on button groups.
Calibrate – Enters pedal calibration. You are asked to move the pedal all the way up and all the way down. This insures
that the pedal will work optimally with the Mastermind GT. Press the Done soft button when you are finished. This
parameter is only available when editing the global pedal parameters from the Main Menu.
Device – Selects the device this pedal will control. Uses the Device Select Menu to allow you to choose from the
defined devices.
CC Number – Allows you to edit the continuous controller number sent by this pedal.
To Next Page
Loading...
Need help?
General
