46 WiNG-MGR v2 User Guide 800.518.1519
3 Web Interface
b Click on the blue square and drag and drop it wherever you’d like it to be on the map.
You’ll notice the X and Y coordinates at the top left change in sych with your cursor as
you move the square.
c Use the Font Size box to change the size of the font used to display the data as needed for
your map and application.
d If you would like the box around the sensor’s data to be a different size, adjust the Min
Size X and Y values. The square will not resize itself to be smaller than the font you’ve
selected.
4 If you’ve added multiple sensors, they will all stack up in the upper left corner of the map.
Repeat step 3, clicking on each one to turn it blue/highlighted and then place it
appropriately on the map.
5 Once all of your points are positioned and sized correctly, click the Save button on the top
right side of the screen.
6 Click the Exit button to return to the Mapping page of the web interface.
To Next Page
Loading...
