Need help?Do you have a question about the RLE Technologies WiNG-MGR and is the answer not in the manual?
General| Brand | RLE Technologies |
|---|---|
| Model | WiNG-MGR |
| Category | Measuring Instruments |
| Language | English |
Describes the WiNG-MGR as a wireless sensor network manager receiving and relaying signals to monitoring systems.
Explains the function of the LEDs on the WiNG-MGR unit to indicate status and actions.
Details the physical ports and connectors on the WiNG-MGR for various connections like antennas and networks.
Describes the configuration options available through the SW1 DIP switches on the WiNG-MGR.
Provides instructions for rack or wall mounting the WiNG-MGR unit.
Details power supply connections and wired relay output connections for the WiNG-MGR.
Covers Ethernet, serial, Modbus connections and setting the IP address via web or EIA-232.
Guides on deploying sensors, using discovery wizards, setting notifications, and mounting tips.
Explains the function of header icons like Alarm Bell, Refresh, and Sign In/Out.
Details the Sensors page, individual sensor pages, readings, and configuration options.
Describes how to view and interpret wireless network metrics like RSSI and LQI for sensors.
Explains how to view and configure alarm and warning settings for sensors.
Covers configuring system identity, IP settings, and time synchronization.
Details the configuration of the two hard-wired relay outputs (K1 and K2).
Guides on configuring EIA-485, Modbus, BACnet, DNS, SMTP, Email, and SNMP.
Covers administrative tasks like XML/Logging, Firmware, User Management, and Radio Settings.
Explains Modbus basics, RTU mode, packet structure, and transmission modes.
Details Modbus exception codes and the structure of request/response packets.
Describes supported Modbus functions like Read Output Registers and Preset Registers.
Provides an example of a typical Modbus RTU Query/Response sequence.
Instructions for connecting and enabling a WiNG-RXT range extender to extend system range.
Highlights safety requirements for the WiNG-RXT, including circuit insulation and power supply.
Steps to download and upload the WiNG-MGR system firmware via the web interface.
Procedure for updating firmware using TFTP, including client configuration and file transfer.
Explains how to check and change the communication channel pair for WiNG sensors.
Details how to change the communication channel pair for the WiNG-MGR manager unit.
Describes how to configure channel pairs for WiNG-RXT range extenders to match system sensors.
Provides solutions for common WiNG-MGR issues like power loss, page access, and sensor display.
Guides on diagnosing sensor issues, particularly those related to battery problems.
Lists detailed technical specifications for the WiNG-MGR, including power, ports, and protocols.
Provides technical specifications for the WiNG-RXT range extender, covering power, range, and indicators.
Details technical specifications for WiNG sensors, including power, transmission, and accuracy.
To Next Page