rletech.com WiNG-MGR User Guide 53
3 Web Interface
3.6.7 SNMP
Use this page to configure the WiNG-MGR’s SNMP communications.
Figure 3.25
SNMP Configuration
Option Description
MIB-2 System
System Name Assign a name to the WiNG-MGR for SNMP system configuration.
System Contact Designate a system contact who is responsible for the WiNG-MGR.
System Location Enter the address of the WiNG-MGR’s physical location.
V1/V2C Community Names
When communicating via SNMP V1/V2, identify devices that receive Traps and/or Syslog
messages from the WiNG-MGR and communicate with the WiNG-MGR over the network.
Get / Read Enter the appropriate community name.
Set / Write Enter the appropriate community name.
Table 3.16
SNMP Configuration Options
To Next Page
Loading...