rletech.com WiNG-MGR User Guide 3
Manufacturer’s Notes
This product is manufactured by RLE Technologies, 104 Racquette Drive, Fort Collins, CO, 80524.
If this product is used in any manner other than that specified by the manufacturer, the protection
provided by the equipment may be impaired.
Product Registration
Product registration helps RLE Technologies inform owners of:
• Product upgrades
• Firmware enhancements
• New products and technologies
• Special offers available only to registered users
Any information provided to RLE Technologies through the registration form will be regarded as
confidential. RLE will not sell or distribute any of the information to third parties. To read our Privacy
Policy, please visit our website: rletech.com.
Technical Support
Personal assistance is available Monday through Friday, from 8:00 a.m. to 5:00 p.m. MST.
A request for assistance may be sent to support@rletech.com.
Otherwise, please call us directly at: 800-518-1519.
The following information is located on the bottom of each WiNG-MGR unit. Please have this
information available whenever a technical support call is placed:
The WiNG-MGR is not a field-serviceable item and must be sent back to RLE Technologies for
mechanical repair. Only RLE certified service personnel is allowed to access the interior of this
equipment, and power must be disconnected (unplugged) from the WiNG-MGR any time the unit is
mechanically serviced. Physically unplug power from the unit any time you are making wiring
connections to or from the WiNG-MGR.
RLE cannot accept an item for repair without a Return Materials Authorization number, which must be
provided by RLE.
Product Model Number
Product Serial Number
Product Manufacture Date
To Next Page
Loading...