rletech.com WiNG-MGR User Guide 65
3 Web Interface
3.7.6 Users
The WiNG-MGR allows you to configure user privileges for up to eight unique users. User 1
is always the Administrator’s slot. Use users 2 - 8 to either configure users with read only
access, or to configure additional Admin accounts.
Figure 3.31
Users Page
Option Description
Login Required Designate when login is required on this WiNG-MGR:
• Never - No one is ever required to log into the WiNG-MGR.
Anyone can access the device and read all the data, and
anyone can make changes to all the settings within the device.
• To Make Changes - Users must be logged in to make changes
within the WiNG-MGR. Anyone can access the device and read
all the data, but you must be logged in to change any of the
configuration and settings.
• Always - All users must log in to gain access to the WiNG-
MGR. You must be logged in to read or access any data within
the WiNG-MGR, and you also must be logged in to make any
changes within the WiNG-MGR.
User Configuration
Username Each user that will log into the WiNG-MGR needs their own unique
username. Enter a username in this field.
Password Assign a password for this username.
Privilege Select which level of access this user will have:
• View Only - This user can view pages within the web interface
but cannot make any changes to settings or configuration.
• Administrator - This user can view data and make changes to
settings and configuration options.
Table 3.22
Users Configuration Options
To Next Page
Loading...