38 WiNG-MGR User Guide 800.518.1519
3 Web Interface
3.4. Alarms
The Alarms page shows all active alarms and warnings reported by sensors monitored by this
WiNG-MGR. If the sensors has returned to normal since the alarm or warning was reported,
this will be noted in the table as well.
Each sensor’s name is a link. Click this link to visit the individual sensor’s status and
configuration page. Here you can view the sensor’s logged data, as well as edit and configure
the sensor’s settings and alarm and warning thresholds.
Figure 3.14
Alarms Page
To Next Page
Loading...