rletech.com WiNG-MGR User Guide 15
C HAPTER
CHAP TER 0GETTING STARTED
2.1. Installation
The WiNG-MGR can be rack or wall mounted, or left free standing. The WiNG-MGR ships
with rack mount tabs. Wall mount tabs are sold separately.
♦ Mount the WiNG-MGR in either the front or the back of a 19-inch rack - You will need two
of RLE’s L-shaped rack mount tabs (included with the WiNG-MGR). Remove the screws
from the sides of the WiNG-MGR, put the tabs in place, and reapply the screws. Mount the
device in the front or the back of your rack. Use the preferred anchoring method as
suggested by the rack manufacturer to mount the unit securely.
♦ If you would prefer to mount the WiNG-MGR on a wall, wall mount tabs (sold separately)
provide a secure solution. Remove the screws from the sides of the WiNG-MGR, put the
wall mount tabs in place, and reapply the screws. Mount the device securely in the desired
location.
To Next Page
Loading...