20 WiNG-MGR User Guide 800.815.1519
2 Getting Started
2.3.4 Antenna
The WiNG-MGR is shipped with three 900 MHz antennas. Plug each antenna into its
appropriate jack on the back of the WiNG-MGR and tighten the connections firmly.
Figure 2.7
Antenna Connections
Once the antennas are secure, you’ll need to ensure proper antenna position. Antennas A and
B can be close together, but to avoid signal interference they both need to be as far away from
antenna C as possible. Extend the leader cables on the antennas to their fullest lengths and
secure the antennas as far away from the WiNG-MGR - and as high off the ground - as
possible.
To Next Page
Loading...