60 WiNG-MGR v2 User Guide 800.518.1519
3 Web Interface
3.8.4 Radios
Alternate communications channel pairs and radio communications can be edited on this page.
If you need to change the channel pair settings for your WiNG system, refer to Appendix C,
“Alternate Channel Pair Communications” on page 83. While it’s not a difficult process, there
are quite a few steps involved because you do need to make sure all the components of your
system - the manager, sensors, and range extenders - are all operating on the correct channel
pairs.
Figure 3.32
Radios Page
Attribute Description
Settings
Radios A & B
(Anaren)
Radios A and B communicate with the WiNG sensors.
Default: On
Table 3.21
Radio Configuration Options
To Next Page
Loading...