RLE Technologies WiNG-MGR v2 - Page 92

92 WiNG-MGR v2 User Guide 800.518.1519
E Technical Specifications
WiNG-RXT
Indicators
RX A 1 green LED
RX B 1 green LED
TX/RX C 1 green LED
Diagnostics 1 green LED
System 1 multicolor LED
RO1 | RO2 1 green LED per relay output
USB RX/TX 1 green LED for transmit, 1 Green LED for receive
Device Status 2 multicolor LED
RS485 Network Status 1 green LED for transmit, 1 Green LED for receive
Operating Environment
Temperature 32ºF to 140ºF (0ºC to 60ºC)
Humidity 5% to 95% RH non-condensing
Altitude 15,000ft (4572m) max.
9,842ft (3000m) max. if applying more than 150V, 50/60Hz
to the relays from overvoltage category II circuit.
Storage Temperature –4ºF to 185ºF (–20ºC to 85ºC)
Mounting 19" Rack Mount or Wall Mount
Dimensions 9.7"W x 4.8”D x 1.8"H (24.6cmW x 12.2cmD x 4.6cmH)
Weight 2.7lb (1.23kg)
Certifications ETL listed; CE; conforms to UL 61010-1, EN 61010, EN
61000-3-2, EN61000-3-3; ETSI EN 301 489-1, ETSI EN
301 489-3; IEC61326-1; certified to CSA C22.2 #61010;
FCC X7J-A11072401, MCQ-XB900HP, and 47CFR 15B;
IC 8975A-A11072401, 1846A-XB900HP, and ICES-003;
RoHS compliant
Power 5VDC @ 400mA max.
USB Communications Port Serial port emulation for firmware upgrades and
diagnostics
Range Up to 1,000 ft (305m) indoors, direct line of sight to WiNG-
MGR or another WiNG-RXT.
Up to 600 ft (183m) direct line of sight to WiNG sensors.
Up to 270 ft (82.3m) through one wall to WiNG sensors.
Up to 100 ft (30.5m) through multiple walls to WiNG
sensors.
Indicators
Table E.2 WiNG-RXT Technical Specifications
Table E.1 WiNG-MGR Technical Specifications (continued)