Robustel R3000 Quad User Guide
RT_UG_R3000 Quad_v.3.0.0 28 May, 2017 17 / 131
Confidential
2.3 USB Interface
USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving
data from slave devices which connected to it. You can insert a USB storage device into the router’s
USB interface, such as a U disk or a hard disk. If there have a supported configuration file or a
router firmware in this USB storage device, the router will automatically update the configuration
file or the firmware. For more details, see 3.11 Interface > USB.
To Next Page
Loading...
