Robustel R3000 Quad - Interface > USB

Robustel R3000 Quad User Guide
RT_UG_R3000 Quad_v.3.0.0 28 May, 2017 58 / 131
Confidential
This window allows you to scan for all available SSIDs in your area and connect to one of those shown on the “Scan
Results” list.
3.11 Interface > USB
This section allows you to set the USB parameters. The USB interface of the router can be used for firmware upgrade
and configuration upgrade.
General Settings @ USB
Item
Description
Default
Enable USB
Click the toggle button to enable/disable the USB option.
ON
Enable Automatic
Firmware Updating
Click the toggle button to enable/disable this option. Enable to update
automatically the router’s firmware when inserting a USB storage device with
a router’s firmware.
ON
Router has the key for USB automatic update. User can generate the key in this page.
Key
Item
Description
Default
USB Automatic Update
Key
Click to generate a key, and click to download the key.
--