Robustel R3000 Quad - Page 95

Robustel R3000 Quad User Guide
RT_UG_R3000 Quad_v.3.0.0 28 May, 2017 95 / 131
Confidential
The window is displayed as below when choosing “TCP Server” as the protocol.
The window is displayed as below when choosing “UDP” as the protocol.
Server Settings
Item
Description
Default
Index
Indicate the ordinal of the list.
--
Enable
Click the toggle button to enable/disable the GPS server
settings.
ON
Protocol
Select from “TCP Client”, “TCP Server” or “UDP”.
TCP Client
Server Address
@TCP Client
Set the address of the TCP Client.
Null
Server Port
@TCP Client
Set the port of the remote TCP Server.
Null
Local Address
Set the local address when the router set as a TCP Server.
Null
Local Port
Set the local port when the router set as a TCP Server.
Null
Server Address @ UDP
Set the address of the TCP Server.
Null
Server Port @ UDP
Set the port of the remote TCP Server.
Null