46 Rockwell Automation Publication 1794-UM066C-EN-E - April 2023
Appendix C Adapter Web Dialogs
Log in to the Web Server When you enter the IP address of the module into your web browser, the Login page appears as
shown in the following example. You must authenticate with your credentials before you can
access the web server.
Mandatory First-time Password Change
You must change the default password after you log in to the web server for a module that is in the
out-of-box state, or when the module has been reset to factory default.
After you log in with the default username and password, the Change Password page appears as
shown in the following examples.
Maximum Limit of Unsuccessful Login Attempts
You are allowed up to three unsuccessful attempts to log in to the web server. An “Incorrect
username and/or password” error message displays for the first and second unsuccessful
attempts. On the third unsuccessful attempt, an “Incorrect Credentials. Login Failed..!” error
message displays and you are locked out of the web server for one minute.
Access the Home Page of
the Web Server
To display and work with the adapter diagnostics home page, follow these procedures.
Default login example Change password example
First and second unsuccessful login attempts Third unsuccessful login attempt
IMPORTANT Make sure that your PC Internet LAN setting and your TCP/IP settings are
configured to access the subnet on which your adapter communicates.
To Next Page
Loading...
Need help?
General
