Rockwell Automation Publication 7000L-UM301F-EN-P - March 2020 119
Operator Interface Chapter 3
Figure 107 - PIN Change Completed
At the end of the operation you will see a status as shown in either Figure 107,
Figure 108
or Figure 109, depending on whether you successfully changed the
PIN, incorrectly entered the existing PIN or incorrectly verified the new PIN.
Figure 108 - Invalid PIN
Figure 109 - Invalid PIN Verification
If you were not successful in changing the password, simply start over again by
typing in the current password value.
To Next Page
Loading...
