Rockwell Automation RELIANCE ELECTRIC SP500 - 2.3 Identifying the Drive by Model Number

2.3 Identifying the Drive by Model Number
A model number identifies each SP500 AC drive. See figure 2.4. This number appears
on the shipping label and on the drive’s nameplate located on the right side of the
drive housing. The drive’s model number contains codes that indicate: input voltage
range, enclosure rating, and horsepower rating. See section 2.3.1 for more
information on the drive power ratings. See section 2.3.2 for more information on the
drive enclosure ratings.
Standard Model Number
iS U 2 1 001
Basic Catalog Number ———__! |
Labeling ——
U = UL Listed, IEC Certified
Voltage
1 = 115 VAC
2 = 200-230 VAC
4 = 380-460 VAC
5 = 575 VAC
Enclosure
1 = NEMA 1 or Chassis
2 = NEMA 12 Only
4 = NEMA 4X (Indoor Only)/NEMA 12
Horsepower Rating
001 = 0.25 to 1.0 HP
002 = 2.0 HP
003 = 3.0 HP
005 = 5.0 HP
007 = 7.5 HP
010 = 10.0 HP
015 = 15.0 HP
020 = 20.0 HP
Figure 2.4 — Identifying the Drive Model Number
All SP500 drives described in this instruction manual function in the same manner. To
identify the mechanical differences between certain models, the manual uses the
notation in table 2.1.
Table 2.1 — SP500 Model Number Notation
Model Notation Input Voltage Horsepower
1SU1xxxx 115 VAC Y%- 1 HP
1SU2xxxx 208 - 230 VAC 1,2, 3, 5, 7.5, 10 HP
1SU4xxxx 380 - 460 VAC 1,2, 3, 5, 7.5, 10, 15, 20 HP
1SU5xxxx 575 VAC 1,2, 3, 5, 7.5, 10 HP
2-6 SP500 AC Drive Installation and Operation Manual Version 3.1