Rockwell Automation RELIANCE ELECTRIC SP500 - Page 98

Parameter Default
No. Parameter Name Range Step Size Setting Setting Date
F-26 Auto-Restart Number of Attempts 0-10 N/A 0
0
= disabled
F-27 Auto-Restart Retry Wait Time 1-30 1.0 1
(seconds)
F-28 Drive Voltage Selection This parameter is set at the factory. Do not change the
setting.
F-29 Analog Output Select SPd N/A SPd
LOAd
UJOL
rEF
F-49 Version Information X.XX N/A Read
Only
B-2 SP500 AC Drive Installation and Operation Manual Version 3.1