Rockwell Automation Reliance electric SP600 Series - Figure 9.7 - Assigning a Custom Name to a User Set

Using the LCD OIM 9-9
This function can be assigned to a function key on the OIM. Refer to
section 9.8.3 for this procedure.
Assigning a Custom Name to a User Set
You have the option of changing the name of the user set when you
save it. To assign a custom name to a user set, follow the procedure
in figure 9.7.
Figure 9.7 – Assigning a Custom Name to a User Set
Save To Usr Set:
User Set 2
User Set 3
User Set 1
Do You Wish to
Rename User Set?
Yes No
Active Dev Set
Will Be Saved To
User Set 2
Press ENTER ( )
Name User Set:
New Nam
e
] ^ _ \ a b c d e f g h i
F1
F2
Active Dev Set
Active Set 0
Press ENTER ( )
Will Be Saved To
OIM displays custom
user set name
Move through name text
Move through letters and
symbols
E->e
F3
Toggle between upper
and lower case
Saving of Active
Device Set To:
User Set 2
Is Complete!
Saving of Active
Device Set to:
Active Set 0
Is Complete!
Save To Usr Set:
User Set 1
New Name
User Set 3