Rockwell Automation Reliance electric SP600 Series - 10.2 Running the Start-Up Routines

10-2 SP600 AC Drive User Manual
10.2 Running the Start-Up Routines
To access the Start-Up routines, select the Start-Up icon from the
main menu as shown in figure 10.1.
The Start-Up menu screen contains 8 selections. The first 7 menu
items contain the most commonly used parameters associated with
each function. See figure 10.2.
The Start-Up routine automates the process of entering values of
selected parameters by taking you to the next parameter after you
accept a parameter value. As each item in the list is completed, you
are automatically advanced to the next step.
Important: Parameter values are saved as they are changed.
Pressing or aborting the Start-Up routine will not
undo the changes.
Figure 10.1 – Accessing the Start-Up Routines
Lang
P0: SP600
Auto
Stopped
Main Menu
Start-Up
Highlight Start-Up icon
Select
Monitor
>>
Figure 10.2 – Start-Up Menu
Start-Up
Main Menu
Quickstart
Input
Voltage
Motor
Data
Motor
Tests
Speed
Limits
Ref Setup
Configure
I/O
Set basic
parameters
Configure for
Alternate
Input Voltage
Enter Motor
Nameplate
Data
Optimize
Torque and
Verify Direction
Set Min/Max
Speed, Stop
Mode, and
Direction Conrol
Done
Set
Reference
Control
Source
Set TB I/O
Functions
Intro
Press
ESC/
PROG