2-2
SP600 AC Drive User Manual
2.1 Identifying the Drive by Model
Number
Each SP600 AC drive can be identified by its model number, as
shown in figure 2.1. The model number is on the shipping label and
the drive nameplate. The model number includes the drive and any
factory-installed options. Model numbers and drive power ratings
are provided in table 2.1.
Figure 2.1 – Identifying the Drive by Model Number
6SP 2 01 - 2P2 B T N N
6SP = SP600
2 = 200-240 V
4 = 380-480 V
5 = 575-600 V
01 = NEMA 1
4X = NEMA 4X
12 = NEMA 12
1F = NEMA 1 Flange
@240 VAC
2P2 = 2.2 A, 0.5 HP/0.37 kW
4P2 = 4.2 A, 1.0 HP/0.75 kW
6P8 = 6.8 A, 2.0 HP/1.5 kW
9P6 = 9.6 A, 3.0 HP/2.2 kW
015 = 15.3 A, 5.0 HP/4.0 kW
022 = 22.0 A, 7.5 HP/5.5 kW
028 = 28.0 A, 10.0 HP/7.5 kW
@480 VAC @600 VAC
1P1= 1.1 A, 0.5 HP/0.37 kW 0P9= 0.9 A, 0.5 HP/0.37 kW
2P1= 2.1 A, 1.0 HP/0.75 kW 1P7= 1.7 A, 1.0 HP/0.75 kW
3P4= 3.4 A, 2.0 HP/1.5 kW 2P7= 2.7 A, 2.0 HP/1.5 kW
005= 5.0 A, 3.0 HP/2.2 kW 3P9= 3.9 A, 3.0 HP/2.2 kW
008= 8.0 A, 5.0 HP/4.0 kW 6P1= 6.1 A, 5.0 HP/4.0 kW
011= 11.0 A, 7.5 HP/5.5 kW 9P0= 9.0 A, 7.5 HP/5.5 kW
014= 14.0 A, 10.0 HP/7.5 kW 011= 11.0 A, 10.0 HP/7.5 kW
022= 22.0 A, 15.0 HP/11.0 kW 017 = 17.0 A, 15.0 HP/11.0 kW
027= 27.0 A, 20.0 HP/15.0 kW 022= 22.0 A, 20.0 HP/15.0 kW
034= 34.0 A, 25.0 HP/19 KW
040= 40.0 A, 30.0 HP/22 KW
052= 52.0 A, 40 HP/ 30 KW
065= 65.0 A, 50 HP/ 37 KW
To Next Page
Loading...
