Rockwell Automation Reliance electric SP600 Series - Page 278

B-6 SP600 AC Drive User Manual
Rated Volts 27 Monitor>Drive Data 12-8
Reset Meters 200 Utility>Drive Memory 12-57
Reset To Defalts 197 Utility>Drive Memory 12-56
Run Boost 70 Motor Control>Volts per Hertz 12-17
S Curve % 146 Dynamic Control>Ramp Rates 12-38
Save MOP Ref 194 Utility>MOP Config 12-55
Save OIM Ref 192 Utility>OIM Ref Config 12-54
Save To User Set 199 Utility>Drive Memory 12-57
Skip Freq Band 87 Speed Command>Spd Mode & Limits 12-20
Skip Frequency 1 84 Speed Command>Spd Mode & Limits 12-20
Skip Frequency 2 85 Speed Command>Spd Mode & Limits 12-20
Skip Frequency 3 86 Speed Command>Spd Mode & Limits 12-20
Slip Comp Gain 122 Speed Command>Slip Comp 12-29
Slip RPM @ FLA 121 Speed Command>Slip Comp 12-29
Slip RPM Meter 123 Speed Command>Slip Comp 12-29
Speed Mode 80 Speed Command>Spd Mode & Limits 12-18
Speed Ref A Hi 91 Speed Command>Speed References 12-24
Speed Ref A Lo 92 Speed Command>Speed References 12-25
Speed Ref A Sel 90 Speed Command>Control Src Select
Speed Command>Speed References
12-23
Speed Ref Source 213 Utility>Diagnostics 12-64
Start Inhibits 214 Utility>Diagnostics 12-64
Start/Acc Boost 69 Motor Control>Volts per Hertz 12-17
Status 1 @ Fault 227 Utility>Diagnostics 12-68
Status 2 @ Fault 228 Utility>Diagnostics 12-68
Stop Mode A 155 Dynamic Control>Stop/Brake Modes 12-40
Stop Mode B 156 Dynamic Control>Stop/Brake Modes 12-40
Stop Owner 288 Communication>Masks & Owners 12-75
TB Man Ref Hi 97 Speed Command>Speed References 12-25
TB Man Ref Lo 98 Speed Command>Speed References 12-26
TB Man Ref Sel 96 Speed Command>Speed References 12-25
Testpoint 1 Data 235 Utility>Diagnostics 12-70
Testpoint 1 Sel 234 Utility>Diagnostics 12-70
Testpoint 2 Data 237 Utility>Diagnostics 12-70
Testpoint 2 Sel 236 Utility>Diagnostics 12-70
Torque Current 4 Monitor>Metering 12-5
Parameter Name No. Path (File>Group)
Page
No.