Rockwell Automation SMC-Flex User Manual

4-12 Programming
Option Parameter Range
Pump Control
Pump Control SMC Option
This parameter identifies the type of
control present and is not user
programmable.
Pump Control
Pump Stop Time
Allows the user to set the time
period for the pump stopping
function.
0…120 s
Starting Mode
Allows the user to program the
SMC-Flex controller for the type of
starting that best fits the application.
Pump Start, Soft Start,
Current Limit Start
Braking Control
SMB Smart
Motor Braking
SMC Option
This parameter identifies the type of
control present and is not user
programmable.
Braking Control
Braking Current
➀
Allows the user to program the
intensity of the braking current
applied to the motor.
0…400% of full load
current
Accu-Stop SMC Option
This parameter identifies the type of
control present and is not user
programmable.
Braking Control
Slow Speed Select
Allows the user to program the slow
speed that best fits the application.
Low:7%
High:15%
Slow Accel Current
Allows the user to program the
required current to accelerate the
motor to slow speed operation.
0…450% of full load
current
Slow Running Current
Allows the user to program the
required current to operate the
motor at the slow speed setting.
0…450% of full load
current
Braking Current
➀
Allows the user to program the
intensity of the braking current
applied to the motor.
0…400% of full load
current
Stopping Current
➀
Allows the user to program the
intensity of the braking current
applied to the motor from slow
speed operation.
0…400% of full load
current

Rockwell Automation SMC-Flex Specifications

General

Brand	Rockwell Automation
Model	SMC-Flex
Category	Touch terminals
Language	English