ROEL CERBER C52 - Follow Me Phone Number Programming Details; Selective Erasure of Follow Me Phone Numbers

27
2. In order to program the selected phone number, you should enter up to 15 digits
as you would on a key phone.
2.1 The zone 1 and 2 LEDs will blink after first digit entering of a new sequence for
selected phone number. Means the control panel is waiting for the other digits for the selected
phone number.
2.2 HEX digits can be added inside the phone number (enter HEX digits A…F by
pressing [*] and [0…5] keys).
HEX DIGITS THAT CAN BE USED INSIDE PHONE NUMBERS
KEY
PRESSED
HEX
DIGIT
DECIMAL
VALUE
USED FOR:
[*] [0]
A
10
[ 0 ] DIGIT
[*] [1]
B
11
INSERT [ * ] INSIDE PHONE NUMBER (only DTMF dialing mode)
[*] [2]
C
12
INSERT [#] INSIDE PHONE NUMBER (only DTMF dialing mode)
[*] [3]
D
13
INSERT PAUSE of 2 SECONDS
[*] [4]
E
14
- unused, it will be ignored by control panel -
[*] [5]
F
15
END OF PHONE NUMBER
3. After the last digit of the phone number press [#] key to confirm and the control
panel will go back within „master user’s programming menu”.
4. In order to erase the selected phone number press [*] key, while the panel is
waiting for the first digit. The keypad buzzer will sound 6 confirmation beeps and the
control panel will go back within „master user’s programming menu”.
Any follow me phone number from 1 to 4 can be selected in order to get a new value or
press [#] key to exit the master user’s programming menu.
PROGRAM THE 1
-ST
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][51][Phone number 1][#] or [CODE][Master Code][51][Phone
number 1][#]
PROGRAM THE 2
-ND
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][52][Phone number 2][#] or [CODE][Master Code][52][Phone
number 2][#]
PROGRAM THE 3-RD FOLLOW ME PHONE NUMBER:
[*][7][Master Code][53][Phone number 3][#] or [CODE][Master Code][53][Phone
number 3][#]
PROGRAM THE 4-TH FOLLOW ME PHONE NUMBER:
[*][7][Master Code][54][Phone number 4][#] or [CODE][Master Code][54][Phone
number 4][#]
SELECTIVE ERASURE OF THE FOLLOW ME PHONE NUMBERS
[*][7][Master Code][5X][*] or [CODE][Master Code][5X][*],
where [CODE] is the key labeled “CODE” and „X” is the 1 to 4 order number for the 4 follow me phone numbers, which
can be erased by the master using these commands.
ERASE THE 1
-ST
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][51][*][#] or [CODE][Master Code][51][*][#]
ERASE THE 2
-ND
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][52][*][#] or [CODE][Master Code][52][*][#]
ERASE THE 3
-RD
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][53][*][#] or [CODE][Master Code][53][*][#]
ERASE THE 4
-TH
FOLLOW ME PHONE NUMBER:
[*][7][Master Code][54][*][#] or [CODE][Master Code][54][*][#],
where [CODE] is the key labeled “CODE”