Rohde & Schwarz FSEA20 - Page 134

FSE CONFigure-Subsystem
1065.6016.12 6.77 E-16
CONFigure:MS Subsystem
This subsystem provides the commands for configuring the GSM MS Analyzer mode (Option FSE-
K10/FSE-K20) for analyzing the behavior of mobiles corresponding to the standards P-GSM, E-GSM, R-
GSM, DCS1800 or PCS1900. EDGE measurement require option FSE-K20, and tests in the GSM
850 MHz band option FSE-K30.
COMMAND PARAMETERS UNIT COMMENT
CONFigure
[:MS]
:MEASurement?
:ARFCn
:AUTO
:LIMit
:PPEak
:PRMS
:EVMRms
:EVMPeak
:OSUPpress
:PERCentile
:FREQuency
:STANdard
:POWer
:CLASs
:COUPled
:LEVel
:LIMit
:EXPected
:SINGle
[:STATe]
:CLEar
:SMALl
:CHANnel
:SFH
:TSC
:NETWork
[:TYPE]
:PHASe
:TXSupp
:PRESet
:SWEeptime
:MTYPe
<numeric_value>
ONCE
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<Boolean>
<numeric_value> | EG1 | EG2 | EG3
| M1 | M2 | M3 | P1
<Boolean>
<numeric_value>
<numeric_value>
<numeric_value>
<Boolean>
--
<Boolean>
<Boolean>
<numeric_value>
PGSM | PGSM900| EGSM |
EGSM900 | DCS | GSM1800 |
PCS | GSM1900 | RGSM |
RGSM900 | GSM850
1|2[,PLUS]
<Boolean>
--
STANdard | AUTO
GMSK | EDGE
--
DEG
DEG
PCT
PCT
DB
PCT
ppm
--
--
DBM
DBM
--
option FSE-K10/K20/K30
query only
no query
no query
no query
no query