FSE DISPlay Subsystem
1065.6016.12 6.93 E-16
:DISPlay:CMAP<1 to 13>:DEFault
This command resets the screen colors of the instrument to their default settings.
Example: ":DISP:CMAP:DEF"
Features: *RST value: --
SCPI: conforming
Modes: A, VA, BTS, MS
This command is an event and has thus no query and no *RST value assigned. The numeric suffix in
CMAP<1 to 13> is not significant.
:DISPlay:CMAP<1 to 13>:HSL <hue>,<sat>,<lum>
This command defines the color table of the instrument.
Parameter: hue = TINT
sat = SATURATION
lum = BRIGHTNESS
The value range is 0.0 to 100.0 for all parameters.
Example: ":DISP:CMAP2:HSL 0.3,0.8,1.0"
Features: *RST value: --
SCPI: conforming
Modes: A, VA, BTS, MS
To each numeric suffix of CMAP is assigned one or several picture elements which can be modified
by varying the corresponding color setting. The following assignment applies:
CMAP1 Trace 1 CMAP8 Soft key State Data Entry
CMAP2 Trace 2 CMAP9 Soft key State OFF
CMAP3 Trace 3 CMAP10 Soft key Shade
CMAP4 Trace 4 CMAP11 Text
CMAP5 Marker CMAP12 Title
CMAP6 Grid CMAP13 Background
CMAP7 softkey State On
The values set are not changed by *RST.
:DISPlay:CMAP<1 to 13>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow |WHITe | DGRay | LGRay | LBLue | LGReen |
LCYan |LRED | LMAGenta
This command defines the color table of the instrument using predefined color values. To each
numeric suffix of CMAP is assigned one or several picture elements which can be modified by
varying the corresponding color setting. The same assignment as for :DISPlay:CMAP<1 to
13>:HSL applies.
Example: ":DISP:CMAP2:PDEF GRE"
Features: *RST value: --
SCPI: conforming
Modes: A, VA, BTS, MS
The values set are not changed by *RST.
To Next Page
Loading...
