MMEMory Subsystem FSE
1065.6016.12 6.140 E-16
:MMEMory:SELect[:ITEM]:CSETup ON | OFF
This command includes the current color setting in the list of partial datasets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:CSET ON"
Features: *RST value: ON
SCPI: device-specific
Modes: A, VA, BTS, MS
:MMEMory:SELect[:ITEM]:HCOPy ON | OFF
This command includes the hardcopy settings in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:HCOPy ON"
Features: *RST value: ON
SCPI: device-specific
Modes: A, VA, BTS, MS
:MMEMory:SELect[:ITEM]:MACRos ON | OFF
This command includes the keyboard macros in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:MACRos ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
:MMEMory:SELect[:ITEM]:SCData ON | OFF
This command includes the tracking generator calibration data in the list of data subsets of a device
setting to be stored/loaded.
Example: ":MMEM:SEL:SCData ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:A, VA
This command only available in conjunction with the option Tracking Generator.
:MMEMory:SELect[:ITEM]:TRANsducer[:ACTive] ON | OFF
This command includes the active transducer factors and set in the list of data subsets of a device
setting to be stored/loaded.
Example: ":MMEM:SEL:TRAN ON"
Features: *RST value: ON
SCPI: device-specific
Modes: A, VA, BTS, MS
Upon MMEM:LOAD the transducer factors and sets which are not currently active but contained in the
data set are restored as well.
To Next Page
Loading...
