Rohde & Schwarz FSEA20 - Page 201

OUTPut Subsystem FSE
1065.6016.12 6.144 E-16
:OUTPut<1|2>AF:SENSitivity <numeric_value>
This command changes the sensitivity of the AF-output.
Parameter: <numeric_value> ::= 0.1 PCT to 100 PCTfor AM
0.1 KHZ to 100 KHZfor FM
0.0 1RAD to 10 RADfor PM
Example: ":OUTP:AF:SENS 20PCT"
Features: *RST value: 100 % for AM
100 kHz for FM
10 rad for PM
SCPI: device-specific
Mode: VA-A