20
Playing
Using the SOUND MODIFY knobs to alter
the sound
You can use the SOUND MODIFY
[1]–[4] knobs to control the sound in
real time.
The parameters you can control
include CUTOFF, RESONANCE, ATTACK,
RELEASE or the Knob 1–4 Function
parameters.
* You may not notice a change in the sound, depending on the tone
you’re using.
Parameter Explanation
CUTOFF
Sets the frequency from which the lter takes eect
(the cuto frequency).
RESONANCE
Emphasizes the sound in the region of the cuto
frequency, adding character to the tone.
ATTACK
Adjusts the time it takes for the sound reaches its
maximum volume after you press the key.
RELEASE
Adjusts the time it takes for the volume to fall to zero
after you take your nger o the key.
Knob 1–4
Function
You can assign various functions to the [1]–[4] knobs.
Press the [KNOB ASSIGN] button to control the
parameters that are assigned to the [1]–[4] knobs.
Refer to “Assigning functions to the SOUND MODIFY
knobs” (p. 43) for how to assign functions to the
[1]–[4] knobs.
MEMO
Press the [KNOB ASSIGN] button while holding
down the [SHIFT] button to assign the volume for
parts 1–4 (the Part 1 Level–Part 4 Level parameters)
to the [1]–[4] knobs. When you do this, the [KNOB
ASSIGN] button blinks.
* When the current part is one of the parts 5–R, the
volume of parts 5–R (the Part 5 Level–Part R Level
parameters) is assigned.
Registering your favorite scenes to the
buttons (FAVORITE)
With the “favorite” feature, you can register your frequently-used
scenes and recall them with the press of a button. Aside from tones,
you can also register and recall settings like the keyboard split, pedal
function assignment and so on.
Scene numbers are registered to the favorites.
Favorite bank 16
Favorite bank 1
Favorite 1–16
¹ The favorites (1–16) can be registered as a set to a total of 16
favorite banks.
¹ Use the [1]–[16] buttons to recall or register the scenes.
¹ When this unit is shipped from the factory, bank 1 contains the
recommended settings and banks 2–16 are empty. All favorites
can be overwritten.
NOTE
If you’ve edited the scene or tone/drum kit settings, you must
save the edited settings in order to correctly register the favorite.
Registering a favorite
1. Select the scene you want to register.
2. Press the [BANK] button to make it light.
The button corresponding to the currently selected bank ([1]–
[16]) blinks.
3. Press the [1]–[16] buttons to select the bank to
which to register.
4. Press the [1]–[16] buttons while holding down the
[FAVORITE] button to select the number to which
you want to register.
This registers the scene as a favorite.
Recalling a favorite
1. Press the [FAVORITE] button to make it light.
2. Press the [1]–[16] buttons to select a favorite.
MEMO
To switch between favorite banks, press the [BANK] button and
then press the [1]–[16] buttons to select a bank.
To Next Page
Loading...
