Roland JUNO-D6 - Formatting a USB Flash Drive (FORMAT USB MEMORY); Returning to the Factory Settings (FACTORY RESET)

54
Operating the menu (MENU)
Formatting a USB ash drive (FORMAT USB
MEMORY)
NOTE
¹ When you format a USB ash drive, all data on that USB ash drive
is lost.
¹ Never turn o the power or remove the USB ash drives while the
screen indicates “Processing...”.
1. Plug a USB ash drive into the instrument.
2. On the UTILITY screen, move the cursor to “FORMAT
USB MEMORY” and press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
3. Move the cursor to “OK” and press the [ENTER]
button.
The screen indicates “Completed” when formatting is completed.
USB ash drive folder architecture
SOUND
Contains tone les to import into the
XPS-60.
SONG LIST
Contains le used by the audio player.
ROLAND
Backup data is saved here.
XPS-60
BACKUP
IMPORT
The folder containing les for sample import.
Returning to the factory settings (FACTORY
RESET)
Here’s how you can restore all the user settings or data stored in this
instrument to their factory settings (factory reset).
NOTE
¹ A factory reset erases the data in question that’s been modied
since you purchased this instrument.
To save the current settings, be sure to use the backup function
before restoring the unit to its factory settings. For details on how
to back up the data of this instrument, refer to “Backing up data
on the XPS-60 to a USB ash drive (BACKUP)” (p. 53) .
¹ Never turn o the power or remove the USB ash drives while the
screen indicates “Processing...”.
1. On the UTILITY screen, move the cursor to
“FACTORY RESET” and press the [ENTER] button.
The FACTORY RESET screen appears.
If a World Expansion is imported/installed
If a World Expansion is not imported/installed
2. Select the item to execute, and turn the value dial
to select its check box.
Turn the value dial a second time to remove the check mark.
Item Explanation
Reset User
Data
Initializes the user scenes, user tones and user
drum kits.
Reset System
Data
Initializes the system settings.
Remove
License (*1)
Initializes the user license and World Expansion.
Initializing the user license lets you import/install
a World Expansion that was downloaded with a
dierent user license.
* This deletes the currently installed World
Expansion.
* This does not delete the pre-installed EXZ101.
To remove the EXZ101, see “Uninstalling a
World Expansion” (p. 27).
(*1) This is displayed if a World Expansion is imported/installed.
See the “Roland Cloud User’s Guide” (Roland website) for
details on the user licenses.