46
Connecting to a computer via USB
Using USB audio
Adjusting the USB audio input
Here’s how to input audio from a device such as a computer
connected via USB to the XPS-60.
1. Press the [MENU] button.
The MENU screen appears.
2. Move the cursor to “SYSTEM EDIT” and press the
[ENTER] button.
The SYSTEM EDIT screen appears.
3. Move the cursor to “COMMON” and press the
[ENTER] button.
4. On the “USB AUDIO” tab page, move the cursor to
“USB Audio Input Level” and use the value dial to
adjust the input level.
MEMO
You can also assign the USB Audio Input Level parameter to the
Knob 1–4 Functions.
Adjusting the USB audio output
Here’s how to output the XPS-60’s audio to a USB-connected
computer.
1. Press the [MENU] button.
The MENU screen appears.
2. Move the cursor to “SYSTEM EDIT” and press the
[ENTER] button.
The SYSTEM EDIT screen appears.
3. Move the cursor to “COMMON” and press the
[ENTER] button.
4. On the “USB AUDIO” tab page, move the cursor to
“USB Audio Output Level” and use the value dial to
adjust the output level.
MEMO
¹ You can also assign the USB Audio Output Level parameter to the
Knob 1–4 Functions.
¹ When USB Audio USB IN Thru on the USB AUDIO settings screen
is set to “ON”, you can mix the audio input to the USB COMPUTER
port with the audio output from the USB COMPUTER port.
To Next Page
Loading...
